Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
/Page-661001.png)
Fuel Pressure Release: Service and Repair
FUEL PRESSURE RELEASE
-
Disconnect battery negative terminal.
-
Place a towel or container below the cold start injector to catch fuel.
Removing Cold Start Injector Union Bolt
-
Slowly loosen the union bolt between cold start injector and fuel rail.
-
When fuel pressure is released, re-tighten union bolt.
Torque: 13 ft.lbs. (18 Nm)
-
Wipe off any splattered gasoline.
-
Reconnect the battery negative (-) cable.
