Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
Wiper Switch: Service and Repair
Combination Switch
Removal/Installation
1.
Disable airbag system, refer to
MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
On models equipped with airbag, pull wheel pad out from steering wheel and disconnect airbag connector. When removing wheel pad, take
care not to pull airbag wire harness. When storing wheel pad, keep upper surface of the pad facing upward. Never disassemble wheel
pad.
3.
On all models, remove horn button screws and horn button.
4.
Scribe alignment marks on steering wheel and steering shaft.
5.
Remove steering wheel nut.
6.
Using a steering wheel puller, remove steering wheel.
7.
Remove steering column upper and lower covers.
8.
Remove combination switch.
9.
Reverse procedure to install. Rearm airbag system, refer to
MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
Headlight & Dimmer Switch
Fig. 2 Combination Switch Exploded View
Fig. 3 Positioning Ball Onto Spring