Celica 2WD L4-2.0L (3S-FE) (1988)
Brake Pad: Service and Repair
Front
Pads, Replace
1.
Remove front wheel and reinstall lug nuts to locate disc temporarily.
2.
Check that brake pad thickness is at least .039 inch (1 mm). Replace pads if too thin.
3.
Remove caliper from torque plate and suspend so brake hose is not under tension. Do not disconnect brake hose.
Fig. 11 Disc brake assembly. Camry, Corolla FWD & 1986-88 Celica