Celica 2WD L4-2.0L (3S-FE) (1988)
Under the Vehicle
1.
Remove the engine under cover No. 1, and No. 2, and the lower air duct.
2.
Loosen the radiator drain plug and drain the coolant into a clean drain pan. (After the coolant is drained out, remove the drain plug.)
Note:
Keep the engine coolant, it will be reused.
3.
Remove the radiator outlet hose.
4.
Disconnect the electric cooling fan water temperature switch.
5.
Remove the 1 cooling fan lower mounting bolt.
Engine Compartment
1.
Remove the radiator inlet hose.
2.
Remove turbo cooling hose.
3.
Remove the reservoir tank hose.
4.
Remove the 2 bolts securing the fuse box.