Celica 2WD L4-2.0L (3S-FE) (1988)
4.
REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL
(a)
Remove the screw.
(b)
Pull to loosen the clips and remove the panel.
5.
REMOVE ENGINE HOOD RELEASE LEVER
Remove the two screws only. Do not disconnect the hood release cable.
6.
REMOVE INSTRUMENT PANEL LOWER
FINISH PANEL
(a)
Remove the five screws and one bolt.
(b)
Disconnect the connectors (speaker and instrument panel light control) and remove the panel.
7.
PULL BY HAND TO REMOVE NO. 2 HEATER TO REGISTER DUCT