Celica 2WD L4-2.0L (3S-FE) (1988)
/Page-194003.png)
12. Remove timing belt from camshaft timing pulley.
NOTE:If reusing the timing belt, place the matchmarks on the timing belt and camshaft timing pulley.
(a) Loosen the mount bolt of the No.1 idler pulley and shift the pulley toward the left as far as it will go, temporarily tighten it.
(b) Remove the timing belt from the camshaft timing pulley.
13. Remove camshaft timing pulley using SST 09278-54012, remove the bolt, plate washer and pulley.
14. Remove crankshaft pulley.
(a) Using SST, remove the pulley mount bolt.
SST 09213-54015 (09214-00030) and 09330-00021
