Celica 2WD L4-2.0L (3S-FE) (1988)
/Page-194008.png)
10. Set No.1 cylinder to TDC/Compression.
(a) Turn the crankshaft pulley, and align the its groove with the "0" timing mark of the No.1 timing belt cover.
(b) Using SST, turn the camshaft timing pulley and align the hole of it with the alignment mark of the bearing cap.
11. Install the timing belt insuring the tension between the crankshaft timing pulley, water pump pulley and camshaft timing pulley.
NOTE:If reusing the timing belt, first align the match- marks of the timing belt and camshaft timing pulley.
12. Check valve timing.
