Celica 2WD L4-2.0L (3S-FE) (1988)
13. Install No.2 timing belt cover.
(a) Install the two gaskets to the No.1 and No.2 belt covers.
(b) Install the belt cover with the five bolts.
14. Install spark plugs.
Torque:
180 kg-cm (13 ft-lb, 18 N.m)
15. Install engine RH mounting insulator and bracket.
(a) Install the bracket with the three bolts. Torque the bolts.
Torque:
530 kg-cm (38 ft.lb, 52 N.m)
(b) Install the mounting insulator with the two nuts and through bolt.
Torque:
Bolt: 800 kg-cm (58 ft-lb, 78 N.m)
Nut: 530 kg-cm (38 ft.lb, 52 N.m)
16. Lower engine.
17. Install alternator bracket.
Torque:
425 kg-cm (31 ft.lb, 42 N.m)
18. Install alternator.
19 Install and adjust the drive belts.
20. On vehicles with cruise control system, install cruise control actuator.
21. Install engine RH under cover.
22. Install RH front wheel.
23. Connect cable to negative terminal of battery.