Celica 2WD L4-2.0L (3S-FE) (1988)
2. INSTALL PISTON RETURN SPRING AND SET SNAP RING IN PLACE
3. COMPRESS RETURN SPRING AND INSTALL SNAP RING IN GROOVE
a. Place SST on the spring retainer, and compress the spring with a shop press.
SST 09350 - 32013 (09351 - 32070, 09351 - 32200)
b. Install the snap ring with your hands. Be sure end gap of snap ring is aligned with the groove of the clutch drum.
4. INSTALL FLANGE. DISCS AND PLATE
Install in order: Flange - disc - plate - plate - disc - flange
5. INSTALL SNAP RING WITH SCREWDRIVER
Be sure end gap of snap ring is aligned with the groove of the clutch drum.
6. INSTALL OVERDRIVE DIRECT CLUTCH TO OVERDRIVE CASE