Celica 2WD L4-2.0L (3S-FE) (1988)
/Page-684002.png)
b. Remove the torque converter.
4. MEASURE DRIVE PLATE RUNOUT AND INSPECT RING GEAR
Set up a dial indicator and measure the drive plate runout.
If runout exceeds 0.20 mm (0.0079 in.) or if the ring gear is damaged, replace the drive plate. If installing a new drive plate, note the orientation of
the spacers and tighten the bolts.
Torque: 850 kg.cm (61 ft.lb, 83 N.m)
Runout: 0.20 mm (0.0079 in.)
