Celica 2WD L4-2.0L (3S-FE) (1988)
5. TURN ASSEMBLY OVER AND FINGER TIGHTEN THE THREE BOLTS IN UPPER VALVE BODY
NOTE: Each bolt length (mm) is indicated in the figure.
6. INSTALL UPPER VALVE BODY COVER AND STRAINER
a. Install the gasket, plate and gasket.
b. Install the strainer onto the plate.
c. Install the valve body cover and finger tighten the nine bolts in valve body cover.
NOTE: Each bolt length (mm) is indicated in the figure.
7. INSTALL LOWER VALVE BODY COVER
a. Install the cover over the gasket.