Celica Coupe L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
(a) Disconnect the 4 high-tension cords at the rubber boot. Do not pull the cords.
NOTICE: Pulling on or bending the cords may damage the conductor inside.
(b) Disconnect the generator wire and clamp.
(c) Remove the 2 bolts and wiring harness protector.
(d) Disconnect the engine wire harness from the cylinder head.
(e) Disconnect the PCV hoses from the cylinder head cover.
(f) Remove the 4 cap nuts, 4 seal washers, cylinder head cover and gasket.