Celica Coupe L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
Vacuum Switching Valve (VSV) for EGR: Testing and Inspection
VACUUM SWITCHING VALVE (VSV) FOR EGR INSPECTION
1. REMOVE VSV
2. INSPECT VSV
A. Inspect VSV for open circuit.
Using an ohmmeter, check that there is continuity between the terminals.
Resistance @ 2O°C (680 F): 37 - 44 Ohms
If there is no continuity, replace the VSV.
B. Inspect VSV for ground.
Using an ohmmeter, check that there is no continuity between each terminal and the body.
If there is continuity, replace the VSV.