Celica Coupe L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-796003.png)
5. REMOVE ENGINE HANGER, AIR INTAKE CHAMBER STAY AND EGR VACUUM MODULATOR.
a. Disconnect the EGR hose and vacuum hose from the EGR valve.
b. Disconnect the high-tension cord clamp from the engine hanger.
c. Remove the 2 bolts, and disconnect the air pipe and fuel inlet hose.
d. Remove the nut, engine hanger, air intake chamber stay, EGR vacuum modulator and gasket.
6. REMOVE EGR VALVE AND PIPE.
a. Disconnect the vacuum hose from the EGR valve.
b. Disconnect the EGR gas temperature sensor connector.
c. Remove the bolt, 3 nuts. EGR valve and pipe.
d. Remove the 2 gaskets.
7. REMOVE AIR INTAKE CHAMBER COVER.
a. Disconnect the following hoses:
