Celica Coupe L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-1259003.png)
e. Align the 'OUT' mark on the upper spring seat to the point outward from the vehicle in its installed position.
f.
Install the bearing and suspension support.
g. Using the 09729 - 22031 SST to hold the suspension support, install a new nut torquing to 47 Nm (35 ft. lbs.). After installing the new nut,
remove the SST.
NOTE: Check that the bearing fits into the recess in the suspension support.
