Toyota Workshop Service and Repair Manuals

Countershaft: Specifications

Counter Shaft 

Starting torque:

With Spring Tension Gauge ..................................................................................................................................................  1.2 - 2.0 kg (2.6 - 4.4 lb)
With Torque Gauge:

Hexagon Nut Side:

New Bearing .........................................................................................................................  0.6 - 1.0 Nm (6 - 10 kgf-cm, 5.2 - 8.7 inch lbs.)
Reused Bearing .......................................................................................................................  0.3 - 0.5 Nm (3 - 5 kgf-cm, 2.6 - 4.3 inch lbs.)

Planetary Sun Gear Bushing Inside Diameter:

Standard ..................................................................................................................................................  29.800 - 29.825 mm (1.1732 - 1.1742 inch)
Maximum .............................................................................................................................................................................  29.870 mm (1.1760 inch)

Underdrive Planetary Pinion Gear Thrust Clearance:

Maximum .....................................................................................................................................................................................  0.5 mm (0.020 inch)

Height (Measure The Distance Between The Tip Of The Counter Shaft And Bolt Seat Of The Clutch Support):

 ............................................................................................................................................................................  33.3 - 35.5 mm (1.311 - 1.398 inch)

End Play ....................................................................................................................................................................  0.2 - 0.9 mm (0.0078 - 0.0354 inch)