Celica Coupe L4-132 2164cc 2.2L DOHC (5S-FE) (1992)
/Page-330003.png)
HINT: (When re-using timing belt)
Align the points marked during removal, and install the belt with the arrow pointing in the direction of engine revolution.
6. Install timing belt guide. Install the guide, facing the cup side outward.
7. Install No.1 timing belt cover.
(a) Install the gasket to the timing belt cover.
(b) Install the timing belt cover with the four bolts.
8. Install crankshaft pulley.
(a) Align the pulley set key with the key groove of the pulley, and slide on the pulley.
(b) Using SST 09213-54015 (09214-00030) and 09330-00021, install the pulley bolt.
Torque: 108 N.m (1,100 kgf.cm, 80 ft.lbf)
9. Install camshaft timing pulley.
(a) Align the camshaft knock pin with the knock pin groove of the pulley, and slide on the timing pulley.
