Celica Coupe L4-132 2164cc 2.2L DOHC (5S-FE) (1992)
Alignment: Service and Repair
Front
Caster & Camber
Caster and camber is not adjustable. If measurements are not within specifications, inspect suspension components for damage or excessive wear.
Replace as necessary.
Toe-In
Measure length of tie rod end on each side and adjust to be equal. Adjust toe-in by turning tubes equal amounts. Clamp adjusting tubes after aligning
clamps with tube slots. Lock tie rod ends so that inner and outer ends are at right angles to each other.