toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Auto A/C|Page 55 > < Auto A/C|Page 53
Page 2
background image

INSPECTION OF SYSTEM AMPLIFIER 

1. Disconnect the amplifier and inspect connector on the wire harness side as shown in the chart below.

Test conditions:
a. Ignition switch: ON
b. Temperature control switch: MAX COOL

NOTE:  Perform the following check only for vehicles with Auto A/C.

2. Connect the connector to the amplifier and inspect connector from back side as shown in the chart below.

Test conditions:
a. Engine running
b. A/C switch: ON
c. Blower switch: HI

INSPECTION OF AUTO A/C AMPLIFIER 

Auto A/C|Page 55 > < Auto A/C|Page 53