Celica Coupe L4-132 2164cc 2.2L DOHC (5S-FE) (1992)
/Page-811004.png)
2. INSPECT DISC, PLATE AND FLANGE
Check that the sliding surface of disc, plate and flange worn or burnt. If necessary, replace them.
HINT:
-
If the lining of the disc is exfoliated or discolored, or even a part of the printed number is defaced, replace all discs.
-
Before assembling new discs, soak them in ATF for at least fifteen minutes.
3. CHECK DIRECT CLUTCH BUSHING
Using a dial indicator, measure the inside diameter of the direct clutch bushing.
Maximum inside diameter: 47.07 mm (1.8531 in.)
If the inside diameter is greater than the maximum, replace the direct clutch.
ASSEMBLY OF DIRECT CLUTCH
1. INSTALL CLUTCH PISTON IN DIRECT CLUTCH DRUM
a. Install new O-rings to the piston. Coat the O-rings with ATF.
b. Being careful not to damage the O-rings, press the piston into the drum with the cup side up.