Celica Coupe L4-132 2164cc 2.2L DOHC (5S-FE) (1992)
/Page-885003.png)
7. REMOVE NO.2 HUB SLEEVE, SHIFTING KEYS AND SPRINGS FROM NO.2 CLUTCH HUB
Using a screwdriver, remove the three shifting keys and springs from No.2 clutch hub.
With S53 Transaxle/2WD
1. INSPECT THIRD AND FOURTH GEAR THRUST CLEARANCE
Using a feeler gauge, measure the thrust clearance.
Standard clearance:
3rd gear 0.10 - 0.25 mm (0.0039 - 0.0098 in.)
4th gear 0.20 - 0.45 mm (0.0079 - 0.0177 in.)
Maximum clearance:
3rd gear 0.30 mm (0.0118 in.)
4th gear 0.50 mm (0.0197 in.)
