Celica Coupe L4-132 2164cc 2.2L DOHC (5S-FE) (1992)
/Page-891005.png)
4. REMOVE THIRD DRIVEN GEAR, SECOND GEAR, NEEDLE ROLLER BEARING AND SYNCHRONIZER RING
a. Shift No.1 hub sleeve into the 1st gear.
b. Using SST and a press, remove the 3rd driven gear and 2nd gear.
SST 09950-00020
c. Remove the needle roller bearing and synchronizer ring.
5. REMOVE NO.1 HUB SLEEVE ASSEMBLY, FIRST GEAR, SYNCHRONIZER RING, NEEDLE ROLLER BEARING, THRUST WASHER
AND LOCKING BALL
a. Using a press, remove the No.1 hub sleeve assembly, 1st gear and synchronizer ring.
b. Remove the needle roller bearing and locking ball.
c. Using a screwdriver and hammer, tap out the thrust washer.
