Celica Coupe L4-132 2164cc 2.2L DOHC (5S-FE) (1992)
/Page-892006.png)
a. Select a snap ring that will allow minimum axial play.
b. Using a screwdriver and hammer, tap in the snap ring.
5. INSPECT FIRST GEAR THRUST CLEARANCE
Using a feeler gauge, measure the 1st gear thrust clearance
Standard clearance: 0.10 - 0.40 mm (0.0039 - 0.0157 in.)
6. INSTALL SYNCHRONIZER RING, SPACER, NEEDLE ROLLER BEARING, SECOND GEAR AND THIRD DRIVEN GEAR
a. Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
b. Install the spacer.
c. Apply gear oil to the needle roller bearing.
d. Install the 2nd gear.
