Celica GT-S L4-1.8L (2ZZ-GE) (2000)
Liftgate Window Glass: Service and Repair
REMOVAL
1. w/ Rear spoiler:
REMOVE REAR SPOILER
2. REMOVE REAR WIPER ARM
3. REMOVE DOOR PULL HANDLE
4. REMOVE BACK DOOR TRIM BOARD
Using a screwdriver, remove the back door trim board.
HINT: Tape the screwdriver tip before use.
5. REMOVE CENTER STOP LIGHT
a. Remove the 2 nuts.
b. Disconnect the connector and washer hose, then remove the center stop light in order A, B as shown in the illustration.
6. REMOVE BACK WINDOW OPENING TRIM
7. REMOVE BACK DOOR GLASS
a. Insert a piano wire between body and glass and let it pass through.
b. Tie both wire ends to wooden blocks or similar object.
HINT: Apply protective tape to the outer surface to keep the surface from being scratched.
NOTE: When separating the glass, take care not to damage the paint and exterior.