Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-919002.png)
Battery positive voltage: 10 - 14 V
8. DISCONNECT CONNECTORS
Disconnect the 2 connectors from the actuator.
9. CONNECT ACTUATOR CHECKER (SST)
a. Connect the actuator checker (SST) to the actuator side wire harness via the sub-wire harness (SST), as shown.
SST 09990-00150, 09990-00250, 09990-00300, 09990-00360
b. Connect the red cable of the checker to the battery positive (+) terminal and black cable to the negative (-) terminal. Connect the black cable of
the sub-wire harness to the battery negative (-) terminal or body ground.
10. INSPECT ABS ACTUATOR OPERATION OF REAR LH WHEEL
HINT: The functions of the ABS actuator checker switches are shown in the table above.
