Celica GT-S L4-1.8L (2ZZ-GE) (2000)
2. DISCONNECT FLEXIBLE HOSE
a. Remove the union bolt and gasket from the caliper, then disconnect the flexible hose from the caliper.
Torque: 30 Nm (310 kgf-cm, 22 ft. lbs.)
HINT: At the time of installation, insert the flexible hose lock securely in the lock hole in the caliper.
b. Use a container to catch the brake fluid as it drains out.
3. REMOVE CALIPER
a. Remove the 2 installation bolts and caliper.
Torque: 47 Nm (475 kgf-cm, 34 ft. lbs.)
b. Remove the caliper from the torque plate.
4. REMOVE 2 PADS WITH ANTI-SQUEAL SHIMS
INSTALLATION
Installation is in the reverse order of removal.
HINT:
^
After installation, fill the brake reservoir with brake fluid and bleed the brake system.
^
Check for leaks.
Disassembly and Assembly