Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-328009.png)
13.
Be careful to push the rocker shaft only as far as the second hole where the piece of bolt is separated, and no further. (Figure 23.)
14.
Once the hole is exposed, remove the separated piece of bolt and inspect for damage to the shaft or shaft housing. (Figure 24.)
15.
Align the rocker shafts back in their correct positions (Figure 25) and install the rocker shaft set bolts (Figure 26).
Torque: 7.5 N.m (76 kgf.cm, 66 in..lbf)
HINT:
