Celica GT-S L4-1.8L (2ZZ-GE) (2000)
6. REMOVE OIL PRESSURE GAUGE AND REINSTALL OIL PRESSURE SWITCH
a. Remove the oil pressure gauge.
b. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
c. Using SST, install the oil pressure switch.
SST 09816-30010
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
7. START ENGINE AND CHECK FOR LEAKS
8. 2ZZ-GE: REMOVE OIL PRESSURE SWITCH OF OIL CONTROL VALVE, AND INSTALL OIL PRESSURE GAUGE
a. Using SST, remove the oil pressure switch.
SST 09816-30010
b. Install the oil pressure gauge.
9. 2ZZ-GE: WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
10. 2ZZ-GE: CHECK OIL PRESSURE for VVTL
Oil pressure:
At idle speed: 39.2 kPa (0.4 kgf/cm2, 5.7 psi)
11. 2ZZ-GE: REMOVE OIL PRESSURE GAUGE AND REINSTALL OIL PRESSURE SWITCH OF OIL CONTROL VALVE
a. Remove the oil pressure gauge.
b. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent