Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-375012.png)
HINT: If necessary, install the sprocket with Special Service Tool (SST).
(SST) 09223-22010
b. 1ZZ-FE: Install the timing chain on the camshaft timing sprockets with the yellow color links aligned with the timing marks on the camshaft
timing sprockets.
c. 2ZZ-GE: Install the timing chain on the camshaft timing sprockets with the orange color links aligned with the timing marks on the camshaft
timing sprockets.
d. Check that the tension between the intake camshaft timing sprocket and crankshaft timing sprocket.
5. INSTALL CHAIN TENSIONER SLIPPER
a. Install the slipper with the bolt.
Torque:
1ZZ-FE: 18.5 Nm (189 kgf-cm, 14 ft. lbs.)
2ZZ-GE: 20.5 Nm (209 kgf-cm, 15 ft. lbs.)
b. Check that the slipper moves is caught on the cylinder head stopper.
NOTICE: DO not turn the crankshaft.
