toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air/Fuel Mixture > < Pressure Specification|Page 690
Page 5
background image

Connect the positive (+) lead from the battery to terminal 4 of the connector and the negative (-) terminal 5. Check that the pump operates.

NOTE:
-

These tests must be done quickly (within 10 seconds) to prevent the coil burning out.

-

Keep fuel pump as far away from the battery as possible.

-

Always do the switching at the battery side.

If operation is not as specified, replace the fuel pump or lead wire.

8. RECONNECT FUEL PUMP & SENDER GAUGE CONNECTOR
9. REINSTALL FLOOR SERVICE HOLE COVER

10. REINSTALL REAR SEAT CUSHION

Air/Fuel Mixture > < Pressure Specification|Page 690