Celica GT-S L4-1.8L (2ZZ-GE) (2000)
a. Disconnect the crankshaft position sensor connector.
b. Remove the 2 bolt and crankshaft position sensor.
Torque: 8.8 Nm (90 kg.cm, 78 in.lb)
INSTALLATION
Installation is in the reverse order of removal.
a. Disconnect the crankshaft position sensor connector.
b. Remove the 2 bolt and crankshaft position sensor.
Torque: 8.8 Nm (90 kg.cm, 78 in.lb)
INSTALLATION
Installation is in the reverse order of removal.