Celica GT-S L4-1.8L (2ZZ-GE) (2000)
HINT: Have a battery ready as the power source to deploy the airbag.
a. Check functioning of the SST.
SST 09082-00700
b. Disconnect the side airbag connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
c. Install the SST.
1. Connect the connectors of the 2 SST to the airbag connector.
SST 09082-00700, 09082-00750
NOTE: To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.
2. Move the SST at least 10 m (33 ft) away from the front of the vehicle.
3. Close all the doors and windows of the vehicle.
NOTE: Take care not to damage the SST wire harness.
4. Connect the SST red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.