Celica GT-S L4-1.8L (2ZZ-GE) (2000)
NOTE: Place the front seat outer belt as shown in the illustration.
3. Move the SST as least 10 m (33 ft) away from the disc wheel.
NOTE: Take care not to damage the SST wire harness.
d. Activate the seat belt pretensioner.
1. Connect the SST red clip to the battery positive (+) terminal and black clip to the battery negative (-) terminal.
2. Check that no one is within 10 m (33 ft) area around the disc wheel.
3. Press the SST activation switch and activate the seat belt pretensioner.
HINT: The seat belt pretensioner operates simultaneously as the LED of the SST activation switch lights up.
e. Dispose of front seat outer belt (with seat belt pretensioner).
CAUTION:
-
The front seat outer belt is very hot when the seat belt pretensioner is activated, so leave it alone for at least 30 minutes after activation.
-
Use gloves and safety glasses when handling a front seat outer belt with activated seat belt pretensioner.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc.to a front seat outer belt with activated seat belt pretensioner.
1. Remove the disc wheel and SST.
2. Place the front seat outer belt in a vinyl bag, tie the end tightly and dispose of it in the same way as other general parts.