Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-1232002.png)
HINT:
-
Do not fit in while holding the outer.
-
When filling in, the outer slides. Do not touch it.
Removal and Installation
COMPONENTS
REMOVAL
NOTE:
-
If the wiring connector of the SRS is disconnected with the ignition switch at ON position, DTCs will be recorded.
-
Never use SRS parts from another vehicle. When replacing parts, replace them with new parts.
-
Never reuse the sensor involved in a collision when the SRS has deployed.
-
Never repair a sensor in order to reuse it.
