Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-182001.png)
Transmission Temperature Sensor/Switch: Service and Repair
ON-VEHICLE REPAIR
1. DISCONNECT SOLENOID CONNECTOR
2. REMOVE LH ENGINE UNDER COVER
3. REMOVE DRAIN PLUG AND DRAIN ATF
4. REMOVE OIL PAN AND GASKET
NOTICE: Some fluid will remain in the oil pan.
Remove the 18 bolts, and carefully remove the oil pan assembly. Discard the gasket.
5. REMOVE OIL STRAINER
a) Remove the 3 bolts and oil strainer.
b) Remove the O-ring.
6. DISCONNECT 5 SHIFT SOLENOID VALVE CONNECTORS
7. REMOVE ATF TEMPERATURE SENSOR
Remove the bolt and lock plate, and remove the ATF temperature sensor.
8. SEPARATE WIRE HARNESS FROM 2 CLAMPS
9. CLAMP WIRE HARNESS TO 2 CLAMPS
