Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-991003.png)
5. REMOVE RECTIFIER END FRAME
a. Remove the 4 nuts and wire clip.
b. Using SST, remove the rectifier end frame.
SST O9286-46011
c. Remove the generator washer from the rotor
6. REMOVE ROTOR FROM DRIVE END FRAME
REASSEMBLY
1. INSTALL ROTOR TO DRIVE END FRAME
a. Place the drive end frame on the pulley.
b. Install the rotor to the drive end frame.
