Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-840002.png)
10. INSTALL COUNTER GEAR SPEED SENSOR
a) Coat a new O-ring with ATIF and install it to the counter gear speed sensor.
b) Install the counter gear speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
11. CONNECT COUNTER GEAR SPEED SENSOR CONNECTOR
12. INSTALL ECM BRACKET
Torque:
Bolt: 18 Nm (185 kgf-cm, 13 ft. lbs.)
Nut: 12 Nm (120 kgf-cm, 9 ft. lbs.)
13. INSTALL ECM AND ECM CASE
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
14. INSTALL BATTERY