Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-1510008.png)
HINT: After cutting off the tip, use all adhesive within the time de scribed in the table.
b. Load the cartridge into the sealer gun.
c. Coat the new glass with adhesive as shown in the illustration.
Adhesive height: 12.0 mm (0.472 in.)
Adhesive width: 8.0 mm (0.315 in.)
7. INSTALL NEW GLASS
a. Install new glass to the body.
b. Hold the glass in place securely with a protective tape or equivalent until the adhesive hardens.
NOTE: Take care not to drive the vehicle during the time described in the table.
8. INSPECT FOR LEAK AND REPAIR
a. Conduct a leak test after the hardening time has elapsed.
b. Seal any leak with sealant.
Part No. 08833-00030 or equivalent.
9. INSTALL ROOF DRIP SIDE MOULDING
10. INSTALL ROOF SIDE RAIL WEATHERSTRIP
11. INSTALL ROOF SIDE INNER GARNISH
12. INSTALL FRONT SEAT OUTER BELT SHOULDER ANCHOR
