Celica GT L4-1.8L (1ZZ-FE) (2001)
/Page-890003.png)
7. REMOVE RESERVOIR
a. Pull out the reservoir stopper.
HINT: At the time of installation, make sure to insert the reservoir stopper through holes of the reservoir and the master cylinder groove.
b. Remove the reservoir and 2 grommets.
c. Remove the cap and strainer from the reservoir.
INSTALLATION
Installation is in the reverse order of removal.
HINT:
^
Before installation, adjust length of brake booster push rod.
^
After installation, fill the brake reservoir with brake fluid, bleed the brake system, and check for leaks.
^
Check and adjust brake pedal.
