Celica GT L4-1.8L (1ZZ-FE) (2001)
c. Apply a light coat of spindle oil or gasoline on the place where a delivery pipe touches on O-ring.
d. While turning the injector clockwise and counterclockwise, push it to the delivery pipes. Install the 4 injectors.
e. Position the injector connector outward.
f.
Place the 2 spacers in position on the cylinder head.
g. Apply a light coat of spindle oil or gasoline on the place where a cylinder head touches an O-ring of the injector.
h. Place the delivery pipe and fuel pipe together with the 4 injectors in position on the cylinder head.
i.
Temporarily install the 2 bolts holding the delivery pipe to the cylinder head.
j.
Temporarily install the bolt holding the fuel pipe to the cylinder head.
k. heck that the injectors rotate smoothly.
HINT: If injectors do not rotate smoothly, the probable cause is incorrect installation of O-ring. Replace the O-ring.
l.
Position the injector connector connector outward.