Celica GT L4-1.8L (1ZZ-FE) (2001)
a. Install the 4 rubber insulators on the lead wires.
NOTE: Be careful of the rubber insulators installation direction.
b. Install the rectifier holder while pushing it with the 4 screws
Torque: 2.9 N.m (30 kgf.cm, 26 in.lbf)
5. INSTALL VOLTAGE REGULATOR AND BRUSH HOLDER
a. Place the seal plate on the rectifier end frame.
b. Place the voltage regulator and brush holder on the rectifier end frame.
NOTE: Be careful of the holder installation direction.
c. Install the 5 screws.