Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
(b) Set the SST on the gasket, and lower the pin until its tip slightly touches the piston. SST 09737-00010
(c) Turn the SST upside down, and set it on the Booster.
SST 09737-00010
(d) Measure the clearance between the Booster Push Rod and pin head (SST). Clearance: 0 mm (0 inch)
(e) Adjust the Booster Push Rod length until the push rod lightly touches the pin head.
3. Install Master Cylinder.
4. Connect vacuum hose to Brake Booster.
5. Fill brake reservoir with brake fluid and bleed brake system. See: Brake Bleeding/Service and Repair
6. Check for fluid leakage.
7. Check and adjust Brake Pedal.
Check and adjust the Brake Pedal, then tighten the clevis lock pin.
8. Do operational check.
