toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Camshaft, Engine|Removal|Page 1300 > < Camshaft, Engine|Removal|Page 1298
Page 7
background image

(d) Disconnect the water bypass pipe from the water pump cover, and remove the water bypass pipe.
(e)

Remove the gasket and O-ring.

14. Remove throttle body. Refer to Powertrain Management.
15. Disconnect hoses.

Disconnect these hoses:
(1) Manifold Absolute Pressure (MAP) sensor vacuum hose from gas filter on manifold.
(2) Brake booster vacuum hose from intake manifold.

16. Remove Exhaust Gas Recirculation (EGR) valve and vacuum modulator.

(a)

Disconnect the EVAP hose from the charcoal canister.

(b) Disconnect the hose clamp from the bracket on the air tube.

(c)

Disconnect the 2 vacuum hoses from the Vacuum Switching Valve (VSV) for the EGR.

(d) Disconnect the vacuum modulator from the clamp on the intake manifold.

Camshaft, Engine|Removal|Page 1300 > < Camshaft, Engine|Removal|Page 1298