toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Camshaft, Engine|Removal|Page 1301 > < Camshaft, Engine|Removal|Page 1299
Page 8
background image

(e)

Loosen the union nut of the EGR pipe, and remove 2 nuts, the EGR valve, vacuum modulator, vacuum hoses assembly and gasket.

17. Remove intake manifold stay.

Remove the bolt, nut and intake manifold stay.

18. Disconnect A/T throttle control cable from intake manifold.

Disconnect the control cable from the clamp on the rear side of the intake manifold.

19. Remove air tube.

(a)

Disconnect these hoses:

(1) 2 Power Steering (PS) air hoses from air tube.

Camshaft, Engine|Removal|Page 1301 > < Camshaft, Engine|Removal|Page 1299