Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
Camshaft: Service and Repair
Assembly
ASSEMBLE EXHAUST CAMSHAFT
1. Mount the camshaft in a vise.
CAUTION: Be careful not to damage the camshaft.
2. Install these parts:
(1) Camshaft gear spring.
(2) Camshaft sub-gear.
(3) Wave washer.
NOTE: Align the pins on the gears with the spring ends.
3. Using snap ring pliers, install the snap ring.
4. Using Special Service Tool (SST) Variable Pin Wrench Set # 09960 - 10010 (Variable Pin Wrench Arm Assembly # 09962 - 01000, Pin 5 #
09963 - 00500), align the holes of the camshaft drive gear and sub-gear by turning camshaft sub-gear clockwise, and install a service bolt.
5. Align the gear teeth of the drive gear and sub-gear, and tighten the service bolt.