Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
(b) Install the intake manifold stay with the bolt and nut.
Torque:
Bolt: 21 Nm (15 ft. lbs.)
Nut: 44 Nm (32 ft. lbs.)
3. Install front Three-Way Catalytic Converter (TWC).
(a)
Place the cushion, retainer and a new gasket on the TWC.
(b) Install the TWC with the 3 bolts and 2 nuts.
Torque: 29 Nm (21 ft. lbs.)
(c)
Install the RH exhaust manifold stay with the 2 bolts and 2 new nuts.
Torque: 42 Nm (31 ft. lbs.)
(d) Connect the oxygen sensor (bank 1 sensor 2) connector.
4. Install engine mounting center member.
5. Install front exhaust pipe.
6. Fill with engine oil.
7. Start engine and check for oil leaks.
8. Recheck engine oil level.
9. Install engine under covers.
