Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
3. Install generator drive belt adjusting bar.
(a)
Install the adjusting bar with the bolt.
Torque: 27 Nm (20 ft. lbs.)
(b) Install the crankshaft position sensor wire to the clamp on the adjusting bar.
(c)
Install the crankshaft position sensor connector to the bracket on the adjusting bar.
4. Install No. 2 idler pulley. Refer to Engine.
5. Install timing belt tension spring. Refer to Engine.
6. Connect lower radiator hose to water inlet.
7. Install timing belt. Refer to Engine.
8. Fill with engine coolant.
9. Start engine and check for coolant leaks.
10. Install RH engine under cover.
