toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air Inlet Servomotor|Page 5586 > < Wheel Fastener|Front|Page 5579
Page 1
background image

Air Door Actuator / Motor: Testing and Inspection
Air Inlet Servomotor

INSPECT AIR INLET SERVOMOTOR OPERATION

1. Connect the positive (+) lead from the battery to terminal 1 the negative (-) lead to terminal 3, check that the arm rotates to the FRESH side

smoothly.

2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, check that the arm rotates to the "RECIRC" side

smoothly.

If operation is not as specified, replace the servomotor.

Air Inlet Servomotor|Page 5586 > < Wheel Fastener|Front|Page 5579