toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Heater Core Case|Removal and Installation|Page 5784 > < Heater Core Case|Diagrams
Page 1
background image

Heater Core Case: Service and Repair
Removal and Installation

HEATER UNIT REMOVAL

 Cooling Unit

1. REMOVE COOLING UNIT

See: Evaporator Case/Service and Repair

2. DRAIN ENGINE COOLANT FROM RADIATOR

REMOVAL HINT:  It is not necessary to drain out all the coolant.

3. REMOVE WATER HOSE FROM HEATER UNIT

a. Remove the bolt and the water valve.
b. Grip the claws of the hose clip with pliers and slide the clip along the hose to a place where it does not clamp the hose to the pipe.
c. Disconnect the water hoses.

4. REMOVE PIPE GROMMETS

5. REMOVE INSTRUMENT PANEL AND REINFORCEMENT

6. REMOVE HEATER UNIT

a. Disconnect the connector.

Heater Core Case|Removal and Installation|Page 5784 > < Heater Core Case|Diagrams