Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
Cruise Control Indicator Lamp: Testing and Inspection
CRUISE MAIN INDICATOR LIGHT
INDICATOR CHECK
1. Turn the ignition switch to ON.
2. Check that the CRUISE MAIN indicator light comes on when the cruise control main switch is turned on, and that the indicator light goes off
when the main switch is turned OFF.
HINT: If the indicator check result is not normal, proceed to trouble shooting for the combination meter section. See: Testing and
Inspection/Symptom Related Diagnostic Procedures
DTC CHECK
HINT: If a malfunction occurs in the No. 1 speed sensors or actuator, etc. during cruise control driving, the ECU actuates AUTO CANCEL of the
cruise control and blinks the CRUISE MAIN indicator light 5 times to inform the driver of a malfunction. At the same time, the malfunction is stored in
memory as a DTC.